uPVC windows are a great option for modern homes. They are easy to maintain and are durable and long-lasting. They are not susceptible to get rotten or rusty like timber and aluminum.
It is crucial to wash and oil upvc window repairs near me windows and doors regularly. This will prevent unnecessary repair doors costs as well as increase energy efficiency.
1. Broken Glass
If the glass in your window is damaged, it could cause a large deal of damage to your home, which can make it extremely dangerous and possibly fatal. It is essential to ensure that your windows are in good working order.
For single pane windows it is relatively easy to replace them, and the replacement is usually able to fit into the frame of the previous one easily. If you have double glazed repair-paned windows that are held together by internal beading, it is difficult to remove and replace the panes that were previously in use. In this case, it is necessary to purchase plastic spacers to help the new pane fit into the window frame.
If you’re planning to try to remove the window panes yourself it is important to wear appropriate safety gear such as gloves that are thick and protective eyewear. It is also recommended to lay down a dropcloth prior to you begin working on the window panes so that any shards fall onto the fabric and not onto the floor and could be trampled.
Once the glass is removed and the glass is removed, it’s a good idea to cover the gap with some clear packaging tape or duct tape to prevent water and drafts from getting into the property until a professional comes out and fix the window. This will also act as a barrier, deterring any intruders from getting access to your home. If the gap is particularly large, you may be interested in a security door that has an integrated window as it will provide the best of both worlds.
2. Sagging
Upvc is a long-lasting and energy efficient alternative to timber sash window. Over time, they can develop a number of problems that include sliding. A sagging window can cause problems with light, draughts, and even security. It’s crucial to act immediately if you notice your uPVC windows are falling down.
To repair double glazing window a window that is sagging, you can try to reposition the hinges. First, you’ll need to open the windows to get at the frame. With a screwdriver, you can unscrew the hinges on the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window to check the fit after having moved your hinges. If you are happy with the fit of the window, tighten the screws to secure them in place.
If you aren’t able to move the hinges you may need to replace the seal. Rubber seals may dry out and lose their elasticity over time, which causes them to loosen. If this happens, it’s important to replace the seal as soon as possible to ensure your uPVC windows remain watertight and secure from draughts.
uPVC handles can also loosen up. Often this is due to screws that have come loose over time. However, it can be due to the fact that the handle mechanism has been worn out. It’s relatively easy to fix a loose uPVC handle. First, you’ll need to close the window and then perform an initial fitting. The corner joints of the sash must align with the casing joint. If it isn’t, you can use a screwdriver to loosen the handle and then turn the mechanism back into position.
3. Water Leaks
If you awake to wet floors and mouldy walls each time it rains, it’s crucial to take action. The leaks of water through windows could cause structural damage to your home, and impact your ability to regulate the temperature of your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.
This is a relatively easy fix that can be done by any skilled DIYer. Depending on the severity of the issue is, old caulking may have to be removed. When it is time to uPVC repair, it is important to be careful not to over-caulk. This can make your window more difficult to clean and lower its energy efficiency.
It is crucial to make sure that the drainage holes are free of debris and that the sill pan has been angled properly so that it drains away from the window. In more serious cases, you may need to replace the window.
Other indicators of water leakage are sills that are rotten and the appearance of black spots of mold on the wall near the window. This fungus thrives under conditions of dampness and can spread quickly throughout the house.
If the leakage occurs between the double-glazed glass, it is more likely the issue is with the seal rather than the frame. This can be easily repaired by a uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.
4. Faulty Hinges
If your uPVC windows are difficult to open, or are loose and blow open in a breeze it could be hinges that are at fault. Anyone with the skills to fix them can replace these in a matter of minutes.
Like any mechanical part hinges are prone to be damaged over time. It is very easy to change a window hinge but it’s much easier if someone helps hold the frame.
Check that the uPVC hinges open and close in the proper direction. You can check this by checking for the arrows on each hinge, this shows which way the window should be opened.
The issue can be caused either by opening the window incorrectly or due to a poor installation in the factory. This can often be resolved by sending us a photograph on our website. We will be pleased to offer you advice.
It is also important to lubricate the hinges on a regular basis. This can be accomplished by applying a light engineering oil to the hinges. We recommend using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication can allow the window to open and close more easily. It also decreases the possibility of a window getting stuck and stop corrosion. This is recommended to be done at least every year. WD40 and other solvent-based fluids are not recommended since they could damage parts of your uPVC window.
5. Draughts
Draughts can be caused by different factors. The hinges may also become unbalanced due to wear, which can cause gaps between the frame and sash. These can be easily fixed by giving them a thorough clean, however when they’re beyond repair, it might be necessary to have them realigned or replaced. The interlock may be misaligned. This happens on the hinge’s side and may need to be cleaned. In some instances it is possible to replace them.
The second most frequent cause of draughts is the window seals. They are susceptible to being worn out or damaged over time and will allow air to escape through the gaps. Replacement of these with high-quality weatherstripping can help stop draughts. Replace the windows made of Upvc with low-emissivity glasses. This will help regulate indoor temperatures, and reduce the possibility of draughts.
The final method to cut down on the amount of draughts is to use a draught-excluder. These are usually fabric tubes filled with a filler that can be hung over your window sill. These will keep your home warm by blocking cold air.
With a bit of regular maintenance and repairs to double glazing, your upvc windows will continue to provide an excellent level of security and insulation for your home. It is crucial to recognise that all windows have a lifespan and there may come the point when it’s more efficient to replace them than fix them. So, if you’re experiencing issues with your Upvc windows, it is always best to seek professional assistance as soon as you can.