Subaru Impreza Key Problems
The Subaru impreza keys allow owners to lock and unlock their car by pressing one button. The most common reason for the key fob not working is a dead coin battery inside the key fob.
The battery replacement process is quick and easy. First find the small piece which houses the flat round battery within the key encasement. Open it and replace the battery, making sure that the correct side is facing up.
Lost or Stolen Keys
We’ve been there before that moment when you reach in your pocket to retrieve your keys, but they’re not to be found. Fortunately, it’s usually not too hard to find your Subaru keys and there are several ways to get them replaced quickly and inexpensively.
If you already have a standard metal car key, you can get it duplicated at a store that has subaru find my keys blanks. These are usually marked “Subaru”. If you need to replace the battery in the key fob, they can get a CR-2032 at many hardware stores or online retailers such as Amazon.
For the key fob, or remote/intelligent key, you’ll have to visit an automotive locksmith who can program new keys to your Subaru model. This will cost you between $50-$250, based on if your Subaru comes with a transponder chips or smart key feature.
For a new key to be programmed, it is necessary to provide the locksmith or dealership with your vehicle identification number (VIN) that is located on the dashboard, near the windshield. This number is needed to verify the status of your vehicle’s warranty and ensure that the key has been programmed correctly for your Subaru model and year. The VIN includes details about the manufacturer and where the car was made. It also tells you if there are any special features on the vehicle, such as immobilizers that hinder the engine from starting in the event that a wrong key is used.
Faulty Key Fob
A key fob that doesn’t function properly could be the result of a variety of reasons. It may be a straightforward issue with the battery or it may need a more complex fix. A dead battery, programming issue with the car, or any other electrical issues within the vehicle are some of the most common problems with the Subaru keyfob.
The battery in the key fob is able to be replaced easily. These can be found at some big-box retailers and hardware stores. They are about $10 each and are easily replaced in just a few moments. how much to replace a subaru key fob to do this is in the owner’s manual. YouTube has many videos that can guide you through the procedure.
Another possible cause is water damage to the key fob. The clips made of metal that hold the batteries could be damaged if take it out of your pocket and then get it wet. If the key fob has problems after replacing the batteries, it could be with the transmitter or with other components of the vehicle. A technician who is trained in troubleshooting the vehicle will determine the cause and pinpoint the issue. They can reprogramme the key fob in order to ensure it is compatible with your vehicle. They can also test for any wiring or antenna issues that might prevent the keyfob from transmitting signal correctly.
Locking issues or unlocked locks
If your Subaru Impreza key fob won’t lock or unlock the doors, there may be a myriad of causes. This issue can be caused by a dead battery, a malfunctioning module as well as signal interference or water damage. To remedy this, you can go to a locksmith or the dealer to get the key fob reprogrammed.
If you are unable to open the trunk, it is likely that the setting of the trunk lock on the key fob is set to “on”. This is a security feature that prevents thieves from taking your vehicle. You can change the setting for the trunk lock/unlock by making contact with your SUBARU dealer.
Another reason why you may have a locked steering wheel occurs when you make a sharp turn and the car locks itself automatically. This happens when the vehicle detects an abrupt turn. It can affect the transmission system as well as the engine. To avoid this, it’s recommended to slow down when turning.
Check that the dealer or locksmith has programmed and cut the spare keys or replacement subaru keys keys you have. Also, ensure that the emergency key works on all trunk and door cylinders, since these are the sole ways to enter the car if you’re locked out. Also, make sure that the new key or spare does not have any marks or signs of tampering on it.
Keyless Entry
Many Subaru models come equipped with keyless entry, which lets you to lock and unlock trunk and doors with a press of a button on your remote. The system uses radio signals to connect with the vehicle when you are within range. There are many different systems on the market that offer this functionality starting with basic kits that unlock just the door for the driver, to more advanced models which also permit remote starting and smartphone integration.
Keyless entry on your Subaru is convenient and secure but it’s vital to know what you should do if the buttons don’t function properly. You can attempt to solve the issue yourself, but it may be required to get your subaru key programming software diagnosed by an expert. In the meantime, you can follow these tips to help keep your car’s remote control working as it should.
If the key fob of your Subaru gets wet, it’s a great idea to wipe the electronic chip from it with isopropyl alcohol and let it dry completely before you put the battery back in. Regularly cleaning it will stop moisture from causing damage to the fob, and causing issues in the future.
If your key fob is not responding, you can switch off the engine by opening the door to the driver’s side. Push the door button to unlock and close it by pressing the button a specific number of times (usually one for each digit) until you hear an emitted sound. Then, repeat the process with each door until get a response from all of them.